April 18, 2025
Connecting a water hose (faucet supply lines) to your kitchen faucet is a straightforward process, but it depends on the type of faucet you have. Here’s a step-by-step guide:
Most kitchen faucets have an aerator (the small screen at the tip) that can be removed to attach a hose adapter.
Hose adapter (look for a "faucet to garden hose adapter" or "sink to hose adapter")
Common sizes: 15/16" (standard for many faucets) or 13/16"
Some adapters are universal with rubber washers for a tight fit.
Adjustable wrench or pliers (optional, for removing the aerator)
Teflon tape (optional, for better sealing)
Remove the aerator:
Twist the aerator counterclockwise by hand.
If it’s stuck, wrap a cloth around it and use pliers gently.
Check the faucet threads:
Measure the inner diameter to ensure you get the right adapter.
Most faucets are male-threaded after removing the aerator.
Attach the adapter:
If needed, wrap Teflon tape around the threads for a better seal.
Screw the adapter clockwise onto the faucet and tighten by hand (don’t overtighten).
Connect the hose:
Screw the garden hose or sprayer hose onto the adapter.
Turn on the faucet slowly to check for leaks.
If your faucet has a pull-down sprayer, you can sometimes use a quick-connect adapter that fits between the hose and the faucet head.
If your faucet doesn’t have removable threads, use a universal clamp-on adapter with a rubber gasket that fits over the faucet spout.
Leaking? Try tightening the connection or adding Teflon tape.
Wrong size? Bring the aerator to a hardware store to match the adapter.
Low water pressure? Ensure the hose isn’t kinked and the faucet is fully open.
Would you like recommendations for specific adapters based on your faucet type? Let me know!
